To correct running mechanics, use the Fault/Reason/Correction Paradigm. First identify the fault in the mechanics. Then find the reason for the flaw and then correct the flaw. Look at the big things first in the context of the PAL Paradigm. Get a sense of the flow of the action, before looking at specific considerations. Focus in on smaller pieces of the puzzle only after global considerations have been addressed. This is in concert with the whole/part/whole concept of motor learning, start with the whole action in this case running, then look at the parts. Decide what parts need attention. Design task oriented drills or movements that will reinforce the correction of those parts. Rather than focus on the fault you are trying to correct, give the athlete a task to achieve that will correct the fault. Above all coach the correction, don’t coach the flaw. Allow the runner to explore and solve the movement equation, then, as soon as possible relate the drill back to the whole action.
In designing and selecting drills to improve running mechanics, answer the following questions:
Why drill? Drill to reinforce correct patterns or to change or improve incorrect patterns.
What drills? The drills should be as directed and specific as possible. A few drills well chosen & clearly defined are better than many general drills that dance around the issue. Make sure that the drills are in fact reinforcing correct mechanics that relate to everyone’s specific needs.
When is it best to do the drills? The optimum time for learning is when the person is fresh and fully recovered from any previous training stress. Therefore, drills are best done near the start of a training session.
How to execute the drills? Based on the objective of the respective drill make sure that the drill is correctly executed.
Drills alone and running are sometimes not enough to improve running mechanics. Improved strength is a big factor in improving running mechanics. Segmental weakness can contribute to poor mechanics, especially in the core. Therefore, it is important to couple any program that attempts to improve running mechanics with a sound strength training program that utilizes multi-joint and multi-plane exercises.
The following is a checklist of running mechanic skill faults to look for and correct. This is by no means an exhaustive list.
Posture
Sitting – Leaning backward
Bending forward at the waist
Excessive side-to-side sway
Head Position – Back or Forward
Arm Action
Swing across the midline of the body
Arm carriage
Too High
Too Low
Abbreviated arm action
Excessive arm action
Leg Action
Foot strike
Exaggerated forefoot or heel contact
Stiff hips
No knee lift – Shuffling
Running mechanics vary with and must be adapted to the speed of the run. A sprint has different demands than a distance run. Running mechanics occur on a continuum from a pure sprint to a long-distance run. The most visible change along the continuum is in the amplitude of the movement. A sprint demands longer stride length, greater air (flight time) and shorter ground contact time. As well as a vigorous arm action, higher knee lift and a forefoot foot strike. Efficiency is not as much of a consideration as is the pure production of power. A distance run will have shorter strides, much shorter flight time, longer ground contact time, a mid-foot to rear foot strike and lower more economical arm action. The longer the distance run the more important the efficiency becomes.